Share this article

Improve this guide

User_mode_health_monitor BSOD error [Fully Fixed]

5 min. read

Updated onOctober 4, 2023

updated onOctober 4, 2023

Share this article

Improve this guide

Read our disclosure page to find out how can you help Windows Report sustain the editorial teamRead more

Key notes

If your system suffers from driver issues or missing system resources, you may encounter the User_mode_health_monitor error.

This stop code is aBlue Screen of Deatherror that is triggered on a system with low storage.

Apart from system resource issues, it can also occur due to corrupted Windows image files, bad sectors in disk or faulty hardware connected to your computer.

Once affected, you may experience screen flashes or crashing issues at frequent intervals.

Since this error can occur due to several reasons, there is no go-to fix that you can apply to resolve the issue.

To make things a bit easier, we have listed a few effective troubleshooting steps to help you resolve the User_mode_health_monitorBSODerror in Windows computers.

How do I fix the User_mode_health_monitor BSOD error?

1. Update drivers with Outbyte Driver Updater

In most cases, theBlue Screen of Deatherrors occurs due to corrupt or outdated device drivers creating incompatible device problems.

To prevent this issue, update all the device drivers with Outbyte Driver Updater.

Outbyte Driver Updater is a popular Windows program to update all your drivers with one click. It offers access to a massive database of drivers that can be managed from the built-in download manager.

After completing the scan, you can manually update individual drivers or all the drivers at once. It also comes with backup and schedule manager features to create automatic backups and manage driver updates.

Key features of Outbyte Driver Updater:

Outbyte Driver Updater

2. Disable automatic restart

That’s it; You have successfully disabled automatic Windows restart. This is necessary if your PC frequently restarts, thus not giving the required time to try and apply any fixes.

3. Run System File Checker tool

The System File Checker tool can resolve the issues that may be occurring due to a missing DLL file or corrupted system resources.

If the tool is stuck at 20 or 40 percent for a while, this is normal behaviour. The process will complete in a few minutes.

4. Boot Windows in Safe Mode

In Safe Mode, Windows only loads minimal services and helps you determine if theBSODerror is occurring due to a third-party software conflict.

If the system remains error-free in the Safe Mode, try uninstalling the most recently installed software on your system.

Make sure to restart the system in normal mode once you have resolved the user_mode_health_monitor (9e) error.

To disable the Safe Mode, open System Configuration, and in the Boot tab uncheck Safe Boot, apply the changes and restart.

5. Perform a System Restore to get back to an earlier state of Windows

Do not turn off your system when the system restore is in process. Your PC will restart once the restore is complete with a success message. After the restart, check if the error bug check 0x9e user_mode_health_monitor is resolved.

6. Disconnect external peripherals

Incompatible USB peripherals and external devices like a mouse, microphone, speaker, or a USB can cause the user mode health monitorBSODerror.

Disconnect all the devices that you may have added to your system recently. Once removed, restart the computer and check if theBlue Screen of Deatherror is resolved.

For more stability, download and install the latest drivers for your peripherals from the official sites.

The user mode health monitorBSODerror can occur due to several reasons. We have listed all the effective fixes that can help you resolve the error quickly.

As a last resort, try clean installing Windows 10 to resolve thisblue screen of deatherror.

User_mode_health_monitor BSOD error [Fully Fixed]#

How do I fix the User_mode_health_monitor BSOD error?#

1. Update drivers with Outbyte Driver Updater#

Outbyte Driver Updater#

2. Disable automatic restart#

3. Run System File Checker tool#

4. Boot Windows in Safe Mode#

5. Perform a System Restore to get back to an earlier state of Windows#

6. Disconnect external peripherals#