Share this article
Improve this guide
Power Calibration Area Error: What it is & How to Fix it
Check solutions that are approved by experts
4 min. read
Updated onOctober 4, 2023
updated onOctober 4, 2023
Share this article
Improve this guide
Read our disclosure page to find out how can you help Windows Report sustain the editorial teamRead more
Key notes
We often need toburn a DVD or CDusing the built-in drive or an external one in a Windows PC. And this usually goes smoothly for most, but many users reported getting thePower Calibration Area Errorwhile burning a DVD.
ThePower Calibration Area Erroron ImgBurn and other tools arises due to a bunch of reasons, and it’s easy to fix them all. So, let’s find out how you can do that.
What is Power Calibration Area Error?
The error shows up when the computer is unable to burn a CD or DVD due to its inability to identify the Optimum Power Calibration rate. This could be both due to hardware and software issues.
Here are some of the reasons you might be encountering the error:
How can I fix Power Calibration Area Error?
Before we head to the slightly complex solutions, here are a few quick ones that might work:
If these don’t work, head to the solutions listed next.
1. Run the built-in troubleshooter
The built-in troubleshooter is usually the most effective when you receive theCalibration area fullerror on Nero. So try it and check if things get up and running.
2. Update the drivers
When you get thePower Calibration Area Error, make sure toupdate the drivers. There are various ways you can do it, but if none work, it’s recommended that you visit the manufacturer’s website and manually download and install the update.
If you want an unchallenging way to update your drivers, then you should give Outbyte Driver Updater a try as it can perform this process automatically.
Outbyte Driver Updater
3. Change the burning speed
Changing the burning speed worked for most users. Remember, you don’t necessarily have to lower the burning speed, as recommended by many. For some, increasing the burning speed from 8x to 24x fixed things.
So, the trick here is to slightly alter the burning speed, be it increasing or decreasing, and check if the Dvdfab Power Calibration Area Error is fixed. Keep changing the value until you get the right one.
4. Try a different software
If nothing so far has worked, we recommend using a software solution. And if you are already using one, switch to thebest disc burning software for Windows.
The software you use plays a critical role, and issues with it can lead to errors. So, try another one, and the problem should be fixed.
In case the problem still persists, your only option is to get the CD/DVD drive checked by a hardware specialist and, if need be, replace it with a new one.
Also, before you leave, do not forget to check how toboost the performance of a Windows PC.
Tell us which fix worked for you in the comments section below.
More about the topics:windows 10 fix,windows 7 fix
Ivan Jenic
Windows Hardware Expert
Passionate about all elements related to Windows and combined with his innate curiosity, Ivan has delved deep into understanding this operating system, with a specialization in drivers and driver troubleshooting.
When he’s not tackling diverse driver-related problems, Ivan enjoys watching good movies and spending time hiking with his family and friends.
User forum
0 messages
Sort by:LatestOldestMost Votes
Comment*
Name*
Email*
Commenting as.Not you?
Save information for future comments
Comment
Δ
Ivan Jenic
Windows Hardware Expert
Ivan has delved deep into understanding the Windows OS, with a specialization in drivers and driver troubleshooting.
