PC doesn’t turn on after overheating? Here’s what you should do

4 min. read

Updated onOctober 4, 2023

updated onOctober 4, 2023

Share this article

Improve this guide

Read our disclosure page to find out how can you help Windows Report sustain the editorial teamRead more

Overheating is one of the issues that can’t be overlooked. It all starts withrare shutdownsbut, the regular high working temperatures will, over time, take a toll on both your PC performance and hardware parts.

And, when that happens, yourcomputer just won’t startfor a variety of reasons. That’s the worst case scenario you’ll be dealing with right there.

There’s only so much we can advise you to do when something like this occurs, but we made sure to compile the list of possible ways you can resolve this issue. Moreover, we added some extra procedures for you to ensure that overheating won’t occur anymore. Make sure to check them out down below.

PC overheated and won’t start: explanation and how to make it work again

1. Wait for the cooldown

For starters, you should wait for some time and try again. Most of the time, it’s hard for constant exposure to high temperatures to damage your PC.

Basically, your motherboard is programmed to shut down in case ofabnormally high CPU or GPU temperatureas a precaution measure. With that in mind, there’s a cooldown period after which your PC will start normally.

On the other hand, if you’re still unable to start your PC after, let’s say, 15 minutes or so, we are sad to inform you some part of the hardware is probably fatally damaged.

Our guess is that motherboard, GPU or CPU are critically affected by the constant exposure to high temperatures. In this case, there’s nothing else you can do but to contact your service and replace the affected components.

2. Software tweaking with SpeedFan

There are two ways to protect and upkeep your PC in regards to high temperatures. Firstly, let’s take a look at software part. Most PCs will track temperature and regulate coolers on their own, but you can boost them manually, as well.

By using athird-party softwareyou can manipulate fans and monitor temperatures on both your PC and laptop. And, by adding an extra power to coolers, avoid the overheating issue.

The first program that crosses our mind is highly-regardedSpeedFan.

SpeedFan is a nifty and small tool that grants you total control over your cooling system. With it, you’ll be able to regulate fans speed manually or use the advanced automatized feature and let it work its magic.

You can download SpeedFan for free by following thislink. And if you’re not satisfied with what it has to offer, make sure to checkthis articlefor viable alternatives.

3. Hardware

Now, let’s move to a hardware part and give you an insight on that, too.Extra coolersare always welcomed. Most of the time, your PC configuration comes with CPU, power supply, and GPU coolers respectively.

But, as you can see for yourself by a simple glimpse on the back side of the computer case, there are empty compartments for extra coolers. If you’re an avid gamer, make sure to add some of those in order to reduce heating substantially.

Moreover, you should probably change your thermal paste. This gum-like grease has an important role in keeping the heat flowing from the heat source (CPU) through the heat sink.

Over time, it will lose its original state and won’t provide your CPU with needed protection. So, make sure to change it and look for improvements. If you’re not sure how to do it, inform yourself in order to avoid additional issues.

That should do it. Don’t forget to post your questions or suggestions in the comments section below. We’ll be glad to hear from you.

PC doesn’t turn on after overheating? Here’s what you should do#

PC overheated and won’t start: explanation and how to make it work again#

1. Wait for the cooldown#

2. Software tweaking with SpeedFan#

3. Hardware#

PC doesn’t turn on after overheating? Here’s what you should do

PC overheated and won’t start: explanation and how to make it work again

1. Wait for the cooldown

2. Software tweaking with SpeedFan

3. Hardware