Share this article

Improve this guide

FIX: IO1 Initialization Failed error in Windows 10

9 min. read

Updated onOctober 4, 2023

updated onOctober 4, 2023

Share this article

Improve this guide

Read our disclosure page to find out how can you help Windows Report sustain the editorial teamRead more

Key notes

Computer errors are a common occurrence, and while some issues are relatively harmless, certain ones such as Blue Screen of Death errors can be more severe.

For example,IO1_INITIALIZATION_FAILED,will crashWindows 10and restart your PC.

Therefore it’s crucial to fix these problems as soon as you can, considering the fact that no issue is always resolved with the easiest troubleshooting step.

Use the solutions in this article to fix this issue.

How can I fix a Windows 10 io1_initialization_failed issue?

1. Update your drivers and Window 10

Drivers are an integral part of every operating system since they allow your PC to utilize your hardware.

In case a certain driver isn’t working properly or it has compatibility issues with Windows 10, you’ll have to update it in order to avoid getting BSoD errors.

Toupdate a driver, you just need to visit your hardware manufacturer’s website and download the latest drivers for your device.

It’s important to update as many drivers as you can, so be sure to download drivers for your motherboard, chipset, and every other major component.

Alternatively, you can also use Device Manager to download all the necessary drivers, but it’s usually better to download the drivers manually directly from the manufacturer.

Downloading drivers is important, but it’s more important to keep Windows 10 up-to-date with the latest updates.

Many updates bring new features and security improvements, but most importantly, these updates fix many bugs and compatibility issues with certain hardware and software.

Since hardware and software compatibility is the common cause for BSoD errors such as IO1_INITIALIZATION_FAILED, you can see why it’s important that you update Windows 10 on a regular basis.

Update drivers automatically

Searching for drivers on your own can be time-consuming. So, we advise you to use a tool that will do this for you automatically.

Using an automatic driver updater will certainly save you from the hassle of searching for drivers manually, and it will always keep your system up-to-date with the latest drivers.

⇒Get Outbyte Driver Updater

2. Run theBSoDTroubleshooter

Note:If you are running on update version 1809 or later you will need to access theBSoD troubleshooter on the Microsoft website, go to the bottom of the page and answer the questions available there for possible fixes.

Does the troubleshooter fail to load with an error? Follow thisuseful guideand fix it in just a couple of simple steps.

3. Run the SFC scan

The System file checker is a command-line tool that basically scans through your system searching for potential issues. If a corrupted system file is a problem, this tool will automatically repair it, and the problem will be resolved.

If you’re having trouble accessing Command Prompt as an admin, then you better take a closer look atthis guide.

4. Run DISM

The DISM tool re-deploys the system image and resolves potential issues along the way. So, it’s possible that running DISM will also resolve the IO1_INITIALIZATION_FAILED error.

Does it seem that everything is lost when DISM fails on Windows? Check out thisquick guideand get rid of the worries.

5. Check the hard drive

This is just our example, so keep in mind that you have to perform chkdsk command for every hard drive partition that you have.

If yourhard driveis damaged, BSoD issues are more than possible. To eliminate the doubt, you should run the chkdsk, which scans all your partitions and resolves potential problems (if possible). So if the culprit of the IO1_INITIALIZATION_FAILED is a corrupt hard drive, this tool will likely resolve the problem.

6. Disable or remove the problematic software

Once your computer boots, check if your PC is working properly. If there are no BSoD errors, your problem is probably caused by one of the disabled applications. Now you need to repeat the same steps and enable applications one by one until you find the one that is causing this error.

Certain software might have issues with Windows 10 and that can be a common cause for BSoD error. In order to fix this error, it’s important to find and remove the problematic software.

Sometimes problems can be caused by a recently installed or updated program, therefore you need to locate the problematic software and remove it.

It’s worth mentioning that antivirus software is the common cause for all sorts of BSoD errors, including IO1_INITIALIZATION_FAILED, therefore it’s advised to remove any third-partyantivirus programs.

Uninstalling the antivirus software might not fix the problem since antivirus programs tend to leave certain files and registry entries once you remove them. To completely remove a certain antivirus you need to download a dedicated uninstaller.

Many antivirus companies have these tools on their websites, so be sure to download one for your antivirus program.

Can’t open Task Manager? Don’t worry, we’ve got theright solutionfor you.

7. Use Command Prompt

Now restart your computer and check if the issue is resolved. If you get stuck on the Automatic repair loop, don’t worry. We’ll throw you thisamazing lifeline.

8. Change Disk Controller mode from RAID or AHCI to SATA/ATA

If you set your Disk Controller mode to RAID or AHCI, but you don’t have the necessary drivers for it, you might get an IO1_INITIALIZATION_FAILED error. To fix this problem you need to set the Disk Controller mode to SATA/ATA.

To do this, you’ll need to enter BIOS and change the necessary settings. For detailed instructions be sure to check your motherboard manual.

Accessing BIOS seems too big of a task? Let us make things easier for you with the help of thisamazing guide.

9. Check your hardware

If the problem persists, it might be due to faulty or recently installed hardware. If you installed any new hardware recently, be sure to remove it or replace it. In addition, check if your hardware is working properly.

These types of errors are often caused by RAM or motherboard issues, so be sure to check those components first. To find the cause of the problem be sure to perform a detailed examination of your hardware.

IO1_INITIALIZATION_FAILED error can cause you problems, but just like many other BSoD errors, this one is most likely caused by faulty hardware. Before you replace your hardware, be sure to try other solutions from this article.

Don’t hesitate to reach in the comments section below for any other questions or suggestions that you may have.

FIX: IO1 Initialization Failed error in Windows 10#

How can I fix a Windows 10 io1_initialization_failed issue?#

1. Update your drivers and Window 10#

2. Run theBSoDTroubleshooter#

3. Run the SFC scan#

4. Run DISM#

5. Check the hard drive#

6. Disable or remove the problematic software#

7. Use Command Prompt#

8. Change Disk Controller mode from RAID or AHCI to SATA/ATA#

9. Check your hardware#