Share this article

Improve this guide

Fix: Computer Won’t Turn On After Power Outage [8 Ways]

You might need to perform a POST test to know the cause of this issue

4 min. read

Updated onOctober 4, 2023

updated onOctober 4, 2023

Share this article

Improve this guide

Read our disclosure page to find out how can you help Windows Report sustain the editorial teamRead more

Key notes

A power outage is one of the most dreaded moments in the life of any computer user. Though you canimprove your battery life, it does matter when a power outage occurs, as your computer just turns off.

To compound the problem, your computer might not turn on for moments after the power outage. If this problem sounds familiar to you, we have prepared some working solutions in this guide to help you get your computer back up and running.

How do you fix a computer that won’t turn on after a power outage?

1. Check whether power plug is connected after a power outage

Sometimes after a power outage, the first tendency is to unplug the power cable to prevent a sudden surge when it is restored.

Check whether your power cable is properly plugged in. If it is, you can now try to switch on your computer.

You can also try disconnecting everything (power plug and peripherals). You can now press & hold the power button for some time to remove all remaining charges.

2. Unplug your computer and remove the battery

This is a sort of first aid for your computer. Simply unplug from any power sources, then remove your computer’s battery (or laptop).

After about five minutes or so, return the battery back and hold down the power button for about 10 seconds (power still unplugged). Now, you can plug it back into the power source.

3. Check your power supply source

If your computer is plugged into a surge protector with a circuit breaker, it probably tripped during the power outage.

If your surge protector has no circuit breaker, the power surge has probably burned it out.

In this case, reset the circuit breaker, or replace the surge protector. This is because it cannot be reused. If your surge protector has the circuit breaker and tripped, reset it.

You can check our detailed guide to knowhow to fix power supply issues on your PC.

4. Check your computer fans

If you try turning on the computer and the fan doesn’t come on with the power supply turned on, then either your power supply isn’t working and needs replacing, or the whole case and your power supply.

If the case is available and you start your computer, and the cooling fan doesn’t run, the problem may be power to the board. Thus, you may have toreplace the motherboard, yourCPU– or both.

If your drives run when yourCPUis off, then your computer’s motherboard, CPU, or other vital elements may have been affected.

5. Check your hard drives after a power outage

If your computer doesn’t switch on after a power outage, you can remove the hard drive and place it in another computer.

But you need a qualified person to do this regarding re-registering your operating system. In case your hard drive is damaged, you need toget a new drive for your PCto work normally.

6. Perform a POST test

Computers come with speakers. If yours are built-in speakers, try to perform the POST test, which will play some beeps when the computer starts up.

The pattern of these beeps will let you know what has gone wrong with your machine. When all is well, the normal startup sound resumes.

7. Check your CPU

You can do this by checking on the vents on the side of your machine while the power is on. A green lamp glows on the motherboard.

If this isn’t visible, the issue is probably with your Switch Mode Power Supply (SMPS) unit on the back of theCPU.

One of the likely causes is the SMPS fusing owing to the power outage or sudden surge of power (on/off). In this case, replace it.

A flashing green LED light means you need to reset your PSU, after which your computer should start up normally.

8. Get a technician to check it

If the other solutions don’twork, get a technician from your device’s manufacturer to check it.

We have concluded this guide on what to do if your computer won’t turn on after a power outage. We believe you now have everything needed to tackle the issue successfully, and you only need to follow the instructions carefully.

If you are facing other issues likeWindows 10 low battery notification not working, check our detailed guide to fix it quickly.

Feel free to let us know how you fixed this issue in the comments below.

Fix: Computer Won’t Turn On After Power Outage [8 Ways]#

How do you fix a computer that won’t turn on after a power outage?#

1. Check whether power plug is connected after a power outage#

2. Unplug your computer and remove the battery#

3. Check your power supply source#

4. Check your computer fans#

5. Check your hard drives after a power outage#

6. Perform a POST test#

7. Check your CPU#

8. Get a technician to check it#