Share this article

Improve this guide

Fix: Canon B200 error on all printer models

5 min. read

Updated onOctober 4, 2023

updated onOctober 4, 2023

Share this article

Improve this guide

Read our disclosure page to find out how can you help Windows Report sustain the editorial teamRead more

Key notes

Printing documents is simple onWindows 10, but sometimes printer problems can occur.

Many users reported getting the Canon B200 error on their printers, so let’s see how we can fix it. Below you’ll find the step-by-step guide.

How can I fix Canon error B200?

1. Replace the problematic cartridges

Error B200 usually occurs due to problematic cartridges and one of the simplest ways to fix this problem is to replace them with adequate ones.

For detailed instructions on how to change the cartridge, be sure to check your printer manual and pay attention to select a compatible one.

⇒Get amazing Canon ink supplies here

After replacing the problematic cartridge, check if the problem is resolved.

2. Remove and clean your printhead

According to users,errorB200 can occur due to problems with yourprinthead, and one thing that you can try is to remove your printhead and clean it.

For detailed instructions on how to remove your printhead, we strongly suggest that you check your printer manual.

After you clean your printhead, make sure that it’s completely dry before you put it back in yourprinter.

Some users are also suggesting to clean printhead connectors with cue tips and alcohol, so you might want to try that.

Before powering on yourprinter, be sure that the connectors are completely dry.

Users are also suggesting to press the power button rapidly to start the reboot mode on theprinter, so you might want to try doing that.

3. Reseat your printhead

One way to fix B200erroris to reseat your printhead. After reseating the printhead, turn off yourprinterand leave it turned off for a couple of minutes.

After that, turn yourprinterback on and check if the problem is resolved.

4. Check for obstructions

Sometimes there could be obstructions in yourprinterthat cause this problem to occur.

To fix this problem, you need to power down yourprinter, remove the paper, and check for any obstructions.

If any obstructions are found, remove them and turn theprinterback on.

Check out these best printer management software to optimize performance.

5. Turn off the printer and open the print cover

This is an unusual solution, but it works according to some users. First, you need to turn off yourprinter.

After that, open the print cover and turn theprinterback on. Cartridges will start moving to the left.

Before the cartridges reach the left side, close down the printer cover and leave theprinterturned on.

Be sure to close the print cover after the cartridges pass the half way to the left side.

After doing that, theprinterwill start working normally. This solution might be a bit tricky to perform, but you should be able to do it after a few tries.

6. Replace the tank holder

Sometimes you can fix the problem simply by replacing the tank holder. Just purchase a new one and replace your current tank holder.

Before replacing the tank holder, check the instruction manual for detailed instructions.

7. Press the Power and Copy buttons

Few users reported that you can fix this problem simply by pressing thePowerandCopybuttons simultaneously a couple of times.

After doing that, theprintershould start and you just need to perform a nozzle check, deep cleaning and printer alignment.

It’s not necessary to perform these steps, but you can do them if you want to.

8. Unplug your printer

Several users reported that they fixed this problem simply by unplugging theirprinter.

Now this might not work for everyone, but it does not hurt to try it out.

Steps to fix error B200 on Canon MX850

If you’re experiencing this error code on this particular printer model, here’s how you can fix it.

According to users, you can fix this problem simply by moving the printhead to the left.

Users reported that they moved the printhead to the left manually and then they pressed the power button several times until theprinterstarted working.

We don’t know if this solution works, but you could try it, just be careful while doing it.

Users reported that they fixed the B200 error on the MX850 printer simply by pressing theONandHomebuttons.

After pressing the buttons about 10 times, theprinterstarted working again.

Few users reported that they fixed this problem simply by turning off theprinterand trying to print again.

After trying to print, you’ll get a message that yourprinteris offline and asked if you want to resume.

PressResume, turn on yourprinterand it will startprinting. We don’t know if this is a permanent solution, but you can at least give it a try.

CannonerrorB200 can prevent you fromprinting, but you should be able to fix it by using one of our solutions.

Which one worked for you? Feel free to share your experience with us via the comments section below.

Fix: Canon B200 error on all printer models#

How can I fix Canon error B200?#

1. Replace the problematic cartridges#

2. Remove and clean your printhead#

3. Reseat your printhead#

4. Check for obstructions#

5. Turn off the printer and open the print cover#

6. Replace the tank holder#

7. Press the Power and Copy buttons#

8. Unplug your printer#

Steps to fix error B200 on Canon MX850#